• 298 Answers SOURCE: Hi Simply turn the tuner on using the power button. Play an open string note close to the tuner (no more than about 1/2 metre away) - for instance the low E on string 6. The built in microphone will pick up the sound and, if your guitar is reasonably close to being in tune the led light labelled 'E' will illuminate on the lower scale on the tuner along with one of the three other leds to indicate whether the note is flat (b), in tune (green) or sharp (#). Due to harmonics any or all of these three leds may flash but it is the one that is on the most that matters. Adjust the tuning peg until the green is on constantly when you play the string.

SR4000 User Manual Contents 1 About this. 11.2.4 Auto exposure. 13.2 Visualizing and capturing 3D data using the SR 3D View Application.

Move on to the next string Note - if the string is more than a semitone sharp or flat a different light may flash (e.g if the low E string is 3/4 of a tone flat the D light will come on). If you wish to tune your guitar to another instrument that is not at perfect pitch (and perhaps cannot be easily adjusted - like a pipe organ) you can use the calibrate button to adjust the setting of the tuner. This temporary recalibration will be lost when the tuner is turned off. Posted on Mar 01, 2011. Good morning, afternoon, evening or night; whatever time you are viewing this. Thank you for choosing FixYa to assist you with your problem.

You want an owners manual for Bang & Olufsen's BeoMaster 4000 Tuner/Amplifer? Gujarati Garba Raas Dandiya Mp3 Songs. Here ar some links that can help you obtain this. (You have to sign up to become a member. Depends on how bad you need this manual.) (More links to websites that may have what you're looking for. (Be prepared to pay if you decide to purchase one.) Hope these links help.

Thank you again for choosing FixYa as your one-stop solution spot for your problems. Be sure to visit our site again and have a good day, evening or night; whatever time of day you are viewing this. Apr 27, 2011 . Hi Simply turn the tuner on using the power button.

Play an open string note close to the tuner (no more than about 1/2 metre away) - for instance the low E on string 6. The built in microphone will pick up the sound and, if your guitar is reasonably close to being in tune the led light labelled 'E' will illuminate on the lower scale on the tuner along with one of the three other leds to indicate whether the note is flat (b), in tune (green) or sharp (#). Due to harmonics any or all of these three leds may flash but it is the one that is on the most that matters. Adjust the tuning peg until the green is on constantly when you play the string. Move on to the next string Note - if the string is more than a semitone sharp or flat a different light may flash (e.g if the low E string is 3/4 of a tone flat the D light will come on).

If you wish to tune your guitar to another instrument that is not at perfect pitch (and perhaps cannot be easily adjusted - like a pipe organ) you can use the calibrate button to adjust the setting of the tuner. This temporary recalibration will be lost when the tuner is turned off. Mar 01, 2011 .

If I understand your problem correctly it sounds as though when you watch your TV through the tuner you get nothing (no sound or picture) but when you watch it through the Aux inputs (with DVD or VCR) everything is fine. If that is the problem you either have a bad tuner or a bad matrix IC. I've seen both problems in this model and the cost to fix either is about the same. If you know TV safety and can solder unplug unit, remove the back, remove the main circuit board, remove the tuner from the board. This web address has an original tuner for $18.00 US plus shipping. Install the new tuner and give it a try.

If all went well this should solve your problem. If not you will probably need a service manual to locate the matrix IC. For $16.00 US as a download. Locate the matrix IC. It should be on a vertical board on the left side. You should be able to get it at this website This should resolve all your problems.

If you can't solder or do not understand electronics you should have a repair tech fix it. Cost should not exceed $100 to $150 US. A free solution would be to hook up a VCR to the Aux input and use the tuner on the VCR and forget about trying to get channels through the TV tuner. It's your choice. Good luck and remember safety. Jul 19, 2006 .

You might try going to this webpage and from the docs&downloads section download and search the Reference manual. It's also here (this looks more like a user guide though) Failing that, choose 'support' from the th top of the page and either contact Alesis support or else ask your question in the 'community' (which you will have to join).