To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: • This unit should be mounted at the bottom of the rack if it is the only unit in the rack. • When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack. Wininstall Le 2003 Discover Download there. • If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006. Installation Guidelines When deciding where to place the RPS 2300, be sure to observe these guidelines: • Operating environment is within the ranges listed in • Airflow around the RPS 2300 and through the vents is unrestricted. • Clearance to the front and rear panel is such that: –Front-panel indicators can be easily read.

–Access to ports is sufficient for unrestricted cabling. –AC power cord can reach from the AC power outlet to the power supply modules on the RPS 2300 front panel. • Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent lighting fixtures. Make sure the cabling is safely away from other devices that might damage the cables. To provide enough distance for cabling, place switches and routers using the RPS 2300 close to the RPS. The maximum RPS cable length is 1.5 meters. • If only one power supply is installed in the RPS 2300, the spare power supply insert that ships with RPS 2300 must be installed in the empty power supply slot.